GDA030-180SX

Our new small angle grinder with collet is especially well-suited for metal- and plastic fabrications, when used with grinding tips or with high-tech grinding inserts. The grinder can be used in foundries, machine shops or in the automotive industry.

When equipped with rubber pads or fiber disks having different grains, the grinder can be used on flat and curved surfaces. The head of this grinder has a lower profile (63 mm) compared to the other GDA type angle-grinders (78,3 mm).

Due to the reduced head height and the head shape (90° angle-head), it is possible to use these grinders in hard-to-reach areas.

Well-balanced 6-mm collet is supplied as standard equipment; 3-mm; 4-mm; 5-mm; 6-mm; ⅛”; 316“; ¼” (optional accessories).

Objednací číslo
6061260B
Max. power output 300 W / .40 hp
Speed (no load) 18000 min-1
Weight 0,54 kg / 1.19 lbs
Drive vane motor
Assortment Additional Assortment
Start safety lever
Design Short design
Rotation right
Air consumption (no load) 0,36 m3/min / 12,71 cfm
Air consumption (loaded) 0,46 m3/min / 16.24 cfm
I.D. of air inlet hose 8 mm / .31 in
Max. Ø of grinding tip 16 mm / .63 in
Max. Ø of grinding insert 6 mm / .24 in
Collets - clamping range 6 [3; 3,1; 4; 4,76; 5; 6,35] mm
Air connection thread 1/4" female
Operating pressure 6,3 bar / 90 psi
Standard Equipment
Collet ø 6 mm 312688
Spanner 14 mm 800410
Spanner 9 mm 800401
Plug 25SF AK 13 SXN 6072224
Oil set, oil-25 ml 6078678
Optional Accessories
Collet ø 3 mm 312681
Collet ø 3,175 mm 312682
Collet ø 4 mm 312684
Collet ø 4,76 mm 313947
Collet ø 5 mm 312686
Collet ø 6,35 mm 312689
Collet ø 6 mm (short design) 3126881
Threaded adapter (1/4"20UNC) for polishing support disc 3126884