HC057-HR20B
Our chipping hammer is used in the building industry (chipping- and demolition work, grooving, cleaning-off, plaster removal), foundry industry (cleaning of castings, chipping of discard beads and welds), and in stone industry (wedging, dressing etc.).
Your advantages: Easy exchange of the chisels, highly durable, simple operation.
Objednací číslo
6060010B
| Weight | 5,7 kg / 12.57 lbs |
|---|---|
| Impact per minute | 2100 min-1 |
| Insertion tip | Hex. ø 20/17x60 mm |
| Air consumption (no load) | 0,6 m3/min / 21.19 cfm |
| Assortment | Additional Assortment |
| Start | safety lever |
| I.D. of air inlet hose | 13 mm / .51 in |
| Air connection | G 1/2'' male |
| Impact per minute - Hz | 35 Hz |
| Operating pressure | 6,3 bar / 90 psi |
Standard Equipment
| Quick release coupling |
|
6072325 |
|---|
Optional Accessories
| Chisel pointed, 6hr.Ø 20#17x60 mm, length 300 mm |
|
370209 |
|---|---|---|
| Chisel pointed, 6hr.Ø 20#17x60 mm, length 300 mm |
|
806390 |
| Chisel pointed, 6hr.Ø 20#17x60 mm, length 400 mm |
|
806391 |
| Chisel pointed, 6hr.Ø 20#17x60 mm, length 500 mm |
|
370210 |
| Chisel pointed, 6hr.Ø 20#17x60 mm, length 500 mm |
|
806392 |
| Flat chisel, HR Ø 20#17x60 mm, length 300 mm, width 28 mm, hardmetal |
|
806382 |
| Flat chisel, HR Ø 20#17x60 mm, length 400 mm, width 28 mm, hardmetal |
|
806383 |
| Flat chisel, HR Ø 20#17x60 mm, length 500 mm, width 28 mm, hardmetal |
|
806383/0 |
| Flat chisel, HR Ø 20#17x60 mm, length 250 mm, width 50 mm, hardmetal |
|
806413 |
| Flat chisel, HR Ø 20#17x60 mm, length 280 mm, width 50 mm, hardmetal |
|
806395 |
| Flat chisel, HR Ø 20#17x60 mm, length 300 mm, width 28 mm |
|
370207 |
| Flat chisel, HR Ø 20#17x60 mm, length 500 mm, width 28 mm |
|
370208 |