NEW PRODUCT 2021: DGS - Robotic grinding head

DA210-004YMK3

Right-rotating drill with MORSE taper - for the optimum drilling and reaming operations - for the construction in the ship building-, aviation and automotive industry, as well as the machine building industry.

When using this drill with the optional available grip-tube, this drill may also be used as a universal drill with equally benefical results. The drill is equipped with a feed-spindle that is also used for the removal of the drill bit. As an optional feature, we can offer the model DA 210 with a ratchet instead of the pilot-wheel. For extreme tight access areas, we offer reduced profile drill designs, without feed-spindle or pilot-wheel. Our drill is additionally equipped with a speed regulator, which helps to reduce the air consumption when idling.

Objednací číslo
3010681A
Max. power output 2100 W / 2.82 hp
Speed (no load) 400 min-1
Weight 11,7 kg / 25.79 lbs
Drive vane motor
Assortment Additional Assortment
Start twist valve
Rotation right
Nominal speed 280 min-1
Air consumption (no load) 0,8 m3/min / 28.25 cfm
Air consumption (loaded) 2,1 m3/min / 74.15 cfm
I.D. of air inlet hose 15 mm / .59 in
Morse taper 3
Drilling into steel to 32 mm / 1.26 in
Reaming up to 27 mm / 1.06 in
Air connection thread 1/2" female
Operating pressure 6,3 bar / 90 psi
Standard Equipment
Quick release coupling 804351